Schedule Now!

 

 

We've unearthed the article on How to Troubleshoot and Repair an Electric Water Heater listed below on the web and concluded it made perfect sense to discuss it with you on this site.

Several modern houses take advantage of an electric water heater for their heater, due to its benefit as well as convenience of use. However, much like any other electric devices, problems may develop with its use, all of a sudden. It can be really aggravating to get up to a cool shower instead of a hot one or having your bath with water that isn't hot adequate or perhaps too hot. Whatever the case may be, hot water heater troubles can be fairly nerve-racking. Thankfully, we've made a listing of feasible services to your water heater problems. There are a variety of elements that might trigger much of these troubles, maybe a problem with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you switch off the major power supply for safety. Whatever the problem is, getting it repaired ought to not position excessive of a problem if you comply with these steps:

 

Call A Professional:

If after replacing all defective parts and resetting your temperature, the water heater still isn't working, you may need to contact an expert plumber for a professional opinion. The trouble with your heating system could be that the cold and hot faucets have actually been changed or it might be undersized for the amount of hot water needed in your home. Whatever the case might be, a specialist plumber would certainly help solve the problem.

 

Examine Your Power Supply:

As standard as this might seem, it is extremely required. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water unexpectedly stops working is to confirm that it isn't a power problem. Examine if the fuse is burnt out or the breaker tripped. If the circuit breaker is the concern, merely transform it off and on again. Change any kind of damaged or worn-out fuse. Test the device with power after these adjustments to see if it's now working.

 

Examine Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't warm sufficient, you may require to examine the temperature settings on your top thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open the access panel and also press the red switch for temperature reset over the thermostat. This must help warm the water. Transform the circuit breaker back on and also inspect if the problem has actually been solved.

 

Check the Burner in the Hot Water Heater:

If it's not a power problem, after that try checking out your burner if it is still working. Test each of your burner to be sure the trouble isn't with any of them. If any one of them is malfunctioning, replace that component and then examine whether the hot water is back on.

 

Conclusion

Hot water heater problems are not constantly major. Most of them are due to small issues like a blown fuse or damaged heating element. Changing the defective components ought to suffice. Nevertheless, if you are still incapable to fix the problem, give a call to your nearby plumber to come to get it taken care of.

 

What Would Cause My Electric Water Heater to Stop Working?

 

Your water heater is one of the most forgotten-about appliances in your home—until it quits working. Once you realize that there’s no hot water, the water heater jumps up to become the most noticeable appliance you have. No one in your family will be happy until you get the water heater fixed.

To fix an electric water heater as soon as possible, follow the troubleshooting advice discussed below.

 

Basic Water Heater Troubleshooting

 

Fortunately, you may be restore the hot water supply simply by resetting the house circuit breaker for the water heater. A tripped circuit breaker is one of the top causes of water heater failures. Shut the hot water heater breaker off then turn it back on. Give the water heater a half hour to heat up (if it’s working) and then check for hot water through one of your faucets.

If you get hot water after resetting the breaker, then the problem may be fixed if the breaker inadvertently tripped and it doesn’t continue tripping.

If the water heater breaker trips again, then you’ll likely need to have a service technician examine and repair the water heater. The service technician will check the circuit breaker and electrical supply wiring for the water heater. A short in the supply wiring or a bad circuit breaker could be causing the breaker to trip. An internal failure such as a broken heating element can also cause the breaker to continue tripping.

When resetting the water heater circuit breaker doesn’t work at all, then the water heater may be getting power while an internal water heater failure is causing the problem.

 

Conduct Advanced DIY Water Heater Troubleshooting

 

If the water heater doesn’t work after resetting the high-temperature limit switch, then you’ll need to either conduct some advanced water heater troubleshooting or have a service technician diagnose and repair the water heater failure.

Sears Technicians created a safe and highly-successful DIY advanced troubleshooting video to help you determine the cause of a water heating failure if you want to try to fix the problem yourself. Follow the advice in this video to find and fix the cause of the heating failure on your own:

 

The video begins with the basic troubleshooting described in the first 2 sections described above. It then goes on to guide you through checking water heater components to safely find the cause of the water heating failure.

If you get to a point in the troubleshooting where you’re not completely confident that you can safely continue, schedule a service technician to diagnose and repair the water heater.

The DIY water heater troubleshooting shown in the above video differs from the diagnosis techniques that service technicians typically use when examining a water heater to find the cause of a heating failure. Safe DIY troubleshooting doesn’t rely on live voltage checks while service technicians often use live voltage checks to quickly find the cause of water heater failures.

While many DIY’ers have been able to find the cause of water heater failures using troubleshooting advice shown in the video, some failures such as a bad circuit breaker can only be found using live voltage checks which should only be conducted by a trained service technician.

Sears Technicians have the training, tools and expertise to quickly find the cause of a water heater failure. Rely on our technicians to diagnose and repair your water heater or any other appliance in your home that quits working.

While the technician is in your home, take advantage of appliance Cleaning & Maintenance offers that the tech discusses with you. Keeping your appliances well-maintained will help them work more efficiently and last longer. Regular professional maintenance will also help prevent costly breakdowns of the appliances you depend on every day.

https://www.searshomeservices.com/blog/what-would-cause-my-electric-water-heater-to-stop-working

 

Hopefully you enjoyed reading our section about Hot Water Heater Repair. Thanks for taking time to read our content. Enjoyed reading our blog posting? Please share it. Let other people check it out. We appreciate reading our article about How to Troubleshoot and Repair an Electric Water Heater.

Check This Out